Service Support

RP310D Thermal Label Printer Common Problem Guide I. Button/Indicator Light Usage Instructions 1.1 Button Function Description ① Print Self-Test Page: With the printer off, press and hold the paper feed button + power button to automatically print a self-test page; ② Paper Learning: With the printer on, press and hold the paper feed button until two beeps sound, then release the button to automatically perform paper learning calibration; ③ Restore Factory Settings: With the cover open, press and hold the paper feed button for 10 seconds, then release the button to complete the factory reset; ④ Print Blank Paper: In standby mode, briefly press the paper feed button to automatically feed one blank label; 1.2 Indicator Light Description ① Solid Indicator Light: Normal standby mode; ② Flashing Indicator Light: Printer error, buzzer alarm; Two consecutive beeps: Printer error; Two consecutive beeps...

To be updated...

YTO RPP322N-FAQ 1. Button and Function Description 1.1 Buttons and Their Descriptions 1.2 Basic Button Function Definitions and Effects Power On: Press and hold the power button for 3 seconds to turn on the printer. Power Off: Press and hold the power button for 3 seconds to turn off the printer while it is on. Paper Feed: Briefly press the paper feed button to feed one full sheet of single-sided paper. Automatic Sleep: When the printer is on, if there is no button operation or data transmission within 10 seconds, the printer will automatically enter sleep mode. Wake Up: When the printer is in sleep mode...

SF RP311N Frequently Asked Questions Guide 1. Basic Function Description 1.1 Button Operation Function Description ① Power On/Off Button: Press "I" to turn on the printer, press "O" to turn off the printer; ② Paper Feed Button: a. Pause Printing: Briefly press the [Paper Feed] button during printing to pause printing; b. Label Learning: Press and hold the [Paper Feed] button until you hear a beep, then release the button to begin label learning; c. Print Self-Test Page: Press and hold the [Paper Feed] button until you hear three beeps, then release the button to automatically print a self-test page; d. Restore Factory Settings: Press and hold...

SF Express RP410S-US Frequently Asked Questions Troubleshooting Manual 1. Basic Function Description 1.1 Button Operation Function Description

Rongda RP410/RP410H (SF Express Transitional Version) Frequently Asked Questions Guide 1. Button, Status Light, and Buzzer Descriptions 2. Daily Use Instructions 2.1 How to Install the Driver Note: The first time the printer is connected to the computer, the driver needs to be installed on the computer before connecting the printer. Installation steps: a. Connect the printer's USB cable to the computer; the computer will automatically recognize the USB drive. b. Open the USB drive folder and double-click to open the driver program to install it. c. After the driver installation is complete, you can check if the printer is working properly by clicking the Windows key in the lower left corner of the computer → Settings → Devices → Printers and Scanners...