RP58B-FAQ

I. Basic Introduction

II. Printing via USB port using the driver

http://m.tjhq.cc/category/downloads/1(Download link)

1. The driver installation steps are as follows:

After downloading the driver, click to open the integrated driver.

Select the language to display.

Click to install

Select the corresponding "Model" and "Port", then click Install. Select the 58mm series model, and the port number should be based on the actual port number.

Click Finish, and the driver installation is complete. There's no need to restart your computer.

2. Printer port setup steps(USBmouth)：

III. Printing via network port

1. The printer needs to have its IP address changed.

Download printer IP modification tool:https://rongtatech.lanzoui.com/iU5RJulyiehhttps://rongtatech.lanzoui.com/iU5RJulyieh

ExtractIP Modification Tool (RP58 Series)Follow the attached tutorial to modify the printer's IP address. (Note: The printer's IP address needs to be changed to be on the same network segment as the router; that is, the first 3 digits of the printer's IP address must be consistent with the router's.)

2. Adding and setting IP ports in the driver

IV. Printing via Bluetooth (Driver-based printing)

V. Frequently Asked Questions and After-Sales Information