How to use the RPP210 portable receipt printer

RPP210Portable Receipt PrinterInstructions for use

1) Pull the belt buckle upwards to open the battery cover and the battery compartment cover.

2) As shown in the picture, put the battery into the battery compartment, being careful not to reverse the positive and negative terminals of the battery;

3) Then close the battery compartment cover.

1) Hold the top cover with both hands and open the paper tray cover with a little force;

2) As shown in the picture, put the paper roll into the paper tray, paying attention to the paper orientation. If it is put in backwards, it will not be able to print.

3) Pull out part of the paper roll as shown in the picture, making sure to pull the paper roll out of the paper tray;

4) After straightening the paper roll, close the top cover.

With the printer powered off, press the power button [POWER] for 2 seconds to turn it on and enter working mode. The power indicator light (red light) will illuminate.

Note: If the printer's paper feed indicator light (blue light) is flashing and there is no paper shortage, it means the printer's battery is about to run out. To continue using the printer, please replace the battery or charge it as soon as possible. See section 4.2.5 Charging for charging instructions.

With the printer powered on, press and hold the power button [POWER] for 2 seconds to power off the printer and turn off all indicator lights.

After receiving the printer, users can perform a self-test at any time to check the printer's current settings and status.

10. The self-test method is as follows: Turn off the printer (if the printer is on), then press and hold the paper feed button [FEED], and then press the power button [POWER] to turn on the printer. The printer will then print a self-test page, which contains the current status of the printer, printer settings, and printing examples.

When the printer is in normal working condition, press the paper feed button [FEED] and the printer will start feeding paper.

5、Charge

After a period of use, the printer battery will be depleted. When the printer battery is almost empty, the paper feed indicator light (blue light) will flash, and the printer will sound an alarm. At this time, the user should prepare to charge the printer. If the printer automatically shuts down during printing, the user must charge it if they want to continue using it.

The charging method is as follows: Plug the charger plug into a 220V, 50HZ power outlet, and then plug the charger plug into the printer's charging outlet. The printer will start charging. During the charging process, the paper feed indicator light (blue light) will flash if the printer is powered on, until the battery is fully charged and the charging indicator light stays on.

The printer can be used normally while charging.