1. 成人九九,亚洲熟妇色自偷自拍另类,岳乳丰满一区二区三区,国产va,亚洲中文天堂,A片网,www.51vv.com,亚洲熟女无码在线
        立即詢盤
        76mm Dot Matrix Receipt Printer Technical Specifications
        Service Support
        Service Support

        76mm Dot Matrix Receipt Printer Technical Specifications

        2026-01-12

        one,76mm dot matrix receipt printerMain features

        ●?High print quality

        ●?Supports cash box driver

        ●?Beautiful design

        ●?Reasonable structure, easy to use and maintain

        ●?Communication interfaces include USB port, parallel port, serial port, and network port.

        ●?Equipped with a paper source sensor, it automatically loads paper and detects the paper feeding status.

        ●?Characters can be enlarged, bolded, and underlined for printing; line spacing and left and right spacing can be adjusted for printing.

        ●?Supports printing bitmaps of different densities and downloaded graphics.

        ●?Supports black mark detection, positioning, and printing.

        ●?Low power consumption and low operating cost

        ●?Compatible with ESC/POS printing command set

        ?

        II. 76mm Dot Matrix Receipt PrinterTechnical Specifications

        ●?Printing method: 9-pin impact dot matrix

        ●?Printhead performance:

        ????Print head pin count: 9 firing pins

        ????Dot size: 0.353 mm

        ????Print density: 210 dots (420 bits)/line

        ????Point movement accuracy: 0.302 mm/step

        ????Printhead lifespan: Approximately 300 x 10? impacts per pin

        ● Effective print width: 42CPL (9 x 9)/35CPL (11 x 9), 40CPL (9 x 9)/33CPL (11 x 9)

        ●?Printing speed: 4.4 character lines/second, bidirectional Chinese character printing: 2.1 lines/second (optional)

        ●?Paper feed speed: 120 mm/s

        ●?Printer interface:

        ????USB: Universal USB interface (Standard Type B)

        ????Serial interface:DB9 female connector, communication baud rate selectable at 4800bps, 9600bps, 19200bps or 38400bps (adjustable via DIP switch), data structure is 8-bit with no parity check.Data bit, 1 stop bit, supports RTS/CTS and XON/XOFF handshake.

        ????Parallel interface:25-pin Parallel (male) bidirectional parallel interface, 8-bit parallel port, supports BUSY/nAck handshake protocol.

        ????Network interface:Standard RJ45-8P interface, 10M/100M adaptive transmission speed, 100M network LED indicator, data communication LED indicator.

        ????Cash drawer control:A 6-wire RJ-11 socket outputs a DC 24V/1A power signal to drive the cash drawer.

        ????Power interface: DC24V power plug

        Note: The interface is optional or customized, and the specific interface shall be subject to the actual product received.

        ?

        ● Print characters:

        ASCII character set:

        ????Font A, 11 x 9 dots, 1.9 (width) x 2.8 (height) mm

        ????Font B, 9x9 dots, 1.6 (width) x 2.8 (height) mm

        GB1 and 2 Chinese character sets:

        ????16x16 dots, 2.8 (width) x 2.8 (height) millimeters

        International code page:

        ????PC437、Katakana、PC850、PC860、PC863、PC865、WPC1252、

        ????10 international languages ??including PC866, PC852, and PC858

        ● Printing paper specifications:

        ????Printing paper type: High-quality single-sheet plain continuous paper or 2-3 sheet self-copying paper

        ????Paper loading method: Features automatic paper suction and easy paper loading functions.

        ????Paper width: 76.0 ± 0.5 mm

        ????Paper roll outer diameter (maximum): Φ75 mm

        ????Paper roll inner diameter (minimum): Φ12 mm

        ????Single-layer paper thickness: 0.06~0.085 mm

        ????Multi-layer paper thickness: 0.05~0.08 mm, total thickness

        ●?Ribbon type: Boxed ribbon ERC-39 (purple or black)

        ●?Printer reliability: 10 million lines (MCBF)

        ●?Black Mark Detection: The black mark is printed on the right side of the front of the ticket, with a length (along the paper feed direction) of 5 mm and a minimum width of 8 mm; the reflectivity of the black mark area is 75% (optional).

        ● Command type used: Compatible with ESC/POS printing command set. Character printing: Supports ANK characters, custom characters, and Chinese characters with double width and double height printing; character spacing can be adjusted. Dot plot printing: Supports different density dot plots and downloadable graphic printing.

        Printer power adapter:

        ????Adapter input voltage: AC 110V/220V, 50~60Hz

        ????Adapter output voltage: DC 24V/2.5A

        ????Printer input voltage: DC 24V/2.5A

        ● Environmental adaptation:

        ????Operating temperature: 0~50°C

        ????Operating relative humidity: 10-80%

        ????Storage relative humidity: 10-90%

        ????Storage temperature: -10 to 60°C