58mm Thermal Receipt Printer Product Overview and Technical Specifications

I. 58mm seriesThermal receipt printerProduct Overview

Key features of the product:

1) High print quality

2) Low noise

3) Supports cash drawer driver

4) Beautiful design

5) The structure is reasonable and the use and maintenance are simple.

6) Communication interfaces include USB port, parallel port, serial port, and Ethernet port.

7) Characters can be enlarged, bolded, and underlined for printing; line spacing and left and right spacing can be adjusted for printing.

8) Supports printing bitmaps of different densities and downloaded graphics.

9) Achieve high-speed printing comparable to calling a hard font library in driver-based printing (dot plot) mode.

10) Low power consumption and low operating cost (no need for ribbons or ink cartridges)

11) Compatible with ESC/POS print command set

?

two,58mm Series Thermal Receipt PrinterTechnical Specifications

● ??Printing method:Line thermal printing

● ??Printing paper width:57.5 ± 0.5 mm

● ??Effective print width:48 mm

● ??Printing speed:90 mm/s MAX

● ?Printhead performance:

Print density: 384 dots/line or 8 dots/mm

Service life: 50 kilometers

● ?Printer interface:

????USB：Universal USB interface (Standard Type B)

Serial interface:DB9 female connector, communication baud rate selectable at 4800bps, 9600bps, 19200bps or 38400bps (adjustable via DIP switch), data structure with no parity, 8 data bits, 1 stop bit, supports RTS/CTS and XON/XOFF handshake protocols.

Parallel interface:25-pin Parallel (male) bidirectional parallel interface, 8-bit parallel port, supports BUSY/nAck handshake protocol;

Network interface: Standard RJ45-8P interface, 10M/100M transmission speed adaptive, 100M network LED indicator, data communication LED indicator;

Cash drawer control:A 6-wire RJ-11 socket outputs a DC 12V/1A power signal to drive the cash drawer.

Power interface: DC12V power plug

Note: The interface is optional or customized, and the specific interface shall be subject to the actual product received.

● ?Print characters:

ASCII character set: 12×24 dots, 1.25 (width) × 3.00 (height) mm

GB1 and 2 Chinese character set: 24×24 dots, 3.00 (width) × 3.00 (height) millimeters

International code pages: PC437, Katakana, PC850, PC860, PC863, PC865, WPC1252, PC866, PC852, PC858, and 10 other international languages.

Barcode printing: Supports printing up to 9 barcode types, including UPC-A, UPC-E, EAN(JAN)13, EAN(JAN)8, CODE39, CODABAR, ITF, CODE93, and CODE128.

●? Printing paper specifications:

Paper type: Thermal paper

Maximum outer diameter of paper rolls: Φ80mm (58), Φ70mm (58E), Φ60mm (58B), Φ40mm (58A)

Paper width: 57.5 ± 0.5 mm

Paper thickness: 0.06–0.08 mm

Recommended thermal paper rolls:

Specifications: AF50KS-EManufacturer: Jujo Thermal Oy (Finland)

Specifications: TF-50KS-EManufacturer: Nippon Paper Industries Co., Ltd

Notice

(1) It is recommended to use the recommended or equivalent quality thermal printing paper, otherwise it will affect the printing quality or even reduce the life of the thermal printhead.

(2) Do not use paper rolls with the ends glued to the core of the paper roll, otherwise it may damage the printer.

(3) If the printing paper is contaminated by chemical agents or oils, it may fade or reduce its heat sensitivity, affecting the printing effect.

(4) Do not rub the surface of the printing paper with hard objects, otherwise it may cause fading.

(5) When the ambient temperature exceeds 70℃, the printing paper will fade, so special attention should be paid to the influence of ambient temperature, humidity and light.

●??Instruction type used:Compatible with ESC/POS printing command set

Character printing: Supports printing ANK characters, custom characters, and Chinese characters with double width and double height; character spacing can be adjusted.

Dot plot printing: Supports printing dot plots of different densities and downloaded graphics.

?

●??Printer power adapter:

Adapter input voltage: AC 110V/220V, 50~60Hz

Adapter output voltage: DC 12V/2A

Printer input voltage: DC 12V/2A

?

●??Environmental adaptation:

Operating temperature: 0~50°C; Operating relative humidity: 10~80%

Storage relative humidity: 10-90% Storage temperature: -10-60°C

?